HDPE Rod, HDPE, Grade Standard, Plastic Length 4 ft, Plastic Diameter 5/8 in, Off-White, Plastic Clarity Opaque, Minimum Temperature -58 Degrees F, Maximum Temperature 170 Degrees F, Tensile Strength 4,500 psi, Impact Strength 2.75 ft-lb/in, Water Absorption 0.01 Percent, Plastic Hardness 65D
| Item | Rod Stock |
|---|---|
| Material | HDPE |
| Color | Off White |
| Length | 4 ft. |
| Diameter | 5/8 in |
| Tensile Strength (PSI) | 4,500 |
| Max. Temp. (F) | 176 |
| Standards | FDA |
| Length Tolerance | +/-0.250 in |
| Diameter Tolerance | -0/+.125 |
| Min. Temp. (F) | -58 Degrees F |
| Type | Thermoplastic |
| Impact Strength (Lbs.) | 2.4 |
| Plastic Hardness Rating | Medium |
| Tensile Strength Rating | Poor |
| Maximum Temperature | 170 deg F |
| Corrosion and Chemical Resistance | Good |
| Plastic Diameter Tolerance | +0.125/-0.000 in |
| Nominal Size | 5/8 in dia x 4 ft L |
| Tensile Strength | 4,500 psi |
| UV Resistant | No |
| Temperature Range | -58 to 170 deg F |
| Shape | Rod |
| Plastic Length | 4 ft |
| Friction Rating | Very Slippery |
| Minimum Temperature | -58 deg F |
| Plastic Length Tolerance | +/-0.250 in |
| Impact Strength Rating | Good |
| Water Absorption Rating | Excellent |
| Impact Strength | 2.75 ft-lb/in |
| Plastic Clarity | Opaque |
| Water Absorption | 0.01 % |
| Plastic Diameter | 5/8 in |
| Plastic Hardness | 65D |
| Grade | Standard |
| Machinability | Not Applicable |
| Wear Factor | Good |
| Metal Detectable | No |
| Flexural Modulus | Not Applicable |
| Dielectric Strength | Not Applicable |
| Light Transmission | Not Applicable |
| Shore Hardness | 65 Shore D |
| Fabrication | Extruded |
| Rockwell Hardness | Not Applicable |
| Scratch-Resistant | Not Applicable |
| Static-Resistant | Not Static-Resistant |
| Filler Material | Not Applicable |
| Weight | 0.51 lb |
| FDA Compliance | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |