LDPE Sheet, LDPE, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.1875 in, Off-White, Plastic Clarity Opaque, Tensile Strength 1,700 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -58 Degrees to 160 Degrees F, Plastic Density 0.91 g/cc, Plastic Hardness 54D
| Item | Sheet Stock |
|---|---|
| Plastic Material | LDPE |
| Plastic Thickness | 0.188 in |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Plastic Color | Off-White |
| Max. Temp. (F) | 160 |
| Min. Temp. (F) | -58 Degrees F |
| Color | Off-White |
| Tensile Strength | 1,700 psi |
| Width Tolerance | +/-0.25 in |
| Plastic Grouping | Sheet Stock |
| Material Color Family | Off-White |
| Material Type | Corrosion Resistant |
| Length Tolerance | +/-0.250 in |
| Thickness Tolerance | +/-10% |
| Plastic Properties | Chemical/Corrosion Resistant, Non-Friction Surface, Moisture Resistant, Wear Material |
| Operating Temp. Range | -58 to 160 deg F |
| Material | LDPE |
| Width | 12" |
| Length | 12" |
| Thickness | 0.188 in |
| Impact Strength Rating | Excellent |
| Temperature Range | -58 to 160 deg F |
| Water Absorption | 0.01% |
| Corrosion and Chemical Resistance | Good |
| Minimum Temperature | -58 deg F |
| Maximum Temperature | 160 deg F |
| Plastic Hardness Rating | Medium Soft |
| Plastic Length Tolerance | +/-1/4 in |
| Impact Strength | No Break |
| Grade | Standard |
| Tensile Strength Rating | Poor |
| Plastic Clarity | Opaque |
| UV Resistant | No |
| Plastic Thickness Tolerance | +/-10% |
| Water Absorption Rating | Excellent |
| Wear Factor | Good |
| Machinability | 85 % |
| Plastic Hardness | 54D |
| Plastic Width Tolerance | +/-1/4 in |
| Shape | Square |
| Friction Rating | Slippery |
| Nominal Size | 12 in W x 12 in L |
| Plastic Density | 0.91 g/cc |
| Backing Type | Not Applicable |
| Maximum Adhesive Temperature | 176 deg F |
| Friction Coefficient | 0.12 |
| Standards | ASTM D1238, ASTM D4635-16, Dept of Canadian Agriculture, USDA |
| Minimum Adhesive Temperature | 65 deg F |
| Rockwell Hardness | 105 HRM |
| Metal Detectable | No |
| Wear Rate | Not Applicable |
| Filler Material | Not Applicable |
| FDA Compliance | 21 CFR 177.1520 |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 16.8 kV/mil |
| Shore Hardness | 50 Shore D |
| Flexural Modulus | 335 MPa |
| Number of Walls | Not Applicable |
| UL 752 Ballistic Rating | Not Applicable |
| Static-Resistant | Not Static-Resistant |
| Fabrication | Extruded |
| Light Transmission | 44 % |
| Product Type | Plastic Sheet |
| Elongation | 200 % |
| Coefficient of Thermal Expansion | 3 x 10^-5 in/in/ Degrees F |
| UV-Resistant | Not UV-Resistant |
| Product Form | Sheet |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |