Jobber Length Drill Bit, Drill Bit Size Q, Drill Bit Point Angle 140 Degrees , Carbide, AlTiN, Decimal Equivalent 0.3320, Letter, Drill Bit Point Type 4 Facet Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 3 in |
| Drill Bit Point Angle | 140 deg |
| Drill Bit Size | Q |
| Number of Flutes | 2 |
| Shank Dia. | 21/64 in |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | AlTiN |
| Shank Type - Machining | Straight |
| Flute Type | Spiral |
| List Number | 4xD |
| Application | Metalworking |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Letter |
| Decimal Equivalent | 0.332 |
| Depth:Dia. Ratio | 4 xD |
| Flute Length | 1.328 in |
| Standards | Not Rated |
| Helix Angle | 25 deg |
| Drilling Depth | 1.328 in |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application | Materials |
| Drill Bit Point Type | 4 Facet Point |
| Material Grade - Machining | C2 |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Maximum Drilling Depth | 1-5/16 in |
| Spiral Direction | Right Hand |
| Primary Material Application ISO Code | P, K, N, M, S, H, O |
| Drill Length Class | Jobber-Length |
| Web Construction | Split |
| Shank Length | 1.672 in |
| Measurement System | Letter |
| Helix Angle - Maximum | 25 deg |
| Wire Rope Length | 3 in |
| Length | 3 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |