Screw Machine Drill Bit, Drill Bit Size 9.5 mm, Drill Bit Point Angle 135 Degrees , 4 Facet Point, Carbide, AlTiN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.3740
| Item | Screw Machine Drill Bit |
|---|---|
| Drill Bit Size | 9.5 mm |
| Overall Length | 79 mm |
| Flute Length | 46 mm |
| Number of Flutes | 2 |
| Material - Machining | Carbide |
| Finish - Machining | AlTiN |
| Drill Bit Point Angle | 135 deg |
| Cutting Direction | Right Hand |
| List Number | 460 |
| Drill Bit Grouping | Drill Bit |
| Shank Dia. | 9.5 mm |
| Grade | C2 |
| Flute Type | Spiral |
| Decimal Equivalent | 0.374 |
| Depth:Dia. Ratio | 5 xD |
| Sizes Included | 9.50mm |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Material Grade - Machining | C2 |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Measurement System | Metric |
| Spiral Direction | Right Hand |
| Primary Material Application ISO Code | P, K, M, N, S, H |
| Primary Material Application | Cast Iron, Steel |
| Shank Length | 1.2992 in |
| Web Thinning | Thinned |
| Maximum Drilling Depth | 1-51/64 in |
| Shank Type - Machining | Straight |
| Drill Length Class | Screw-Machine Length |
| Drill Bit Point Type | 4 Facet Point |
| Web Construction | Split |
| Secondary Material Application | Brass, Bronze, Copper, Aluminum, Hardened Steel |
| Helix Angle - Minimum | Not Applicable |
| Helix Angle - Maximum | 15 deg |
| Secondary Material Application ISO Code | N, H |
| Wire Rope Length | 79 mm |
| Length | 79 mm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |