Screw Machine Drill Bit, Drill Bit Size Z, Drill Bit Point Angle 135 Degrees , 4 Facet Point, Carbide, AlTiN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.4130
| Item | Screw Machine Drill Bit |
|---|---|
| Drill Bit Size | Z |
| Overall Length | 3-3/8 in |
| Flute Length | 2 in |
| Number of Flutes | 2 |
| Material - Machining | Carbide |
| Finish - Machining | AlTiN |
| Drill Bit Point Angle | 135 deg |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Depth:Dia. Ratio | 5 xD |
| Shank Dia. | 13/32 in |
| Grade | C2 |
| Decimal Equivalent | 0.413 |
| List Number | 460 |
| Drill Bit Grouping | Drill Bit |
| Sizes Included | Z |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 1-3/8 in |
| Web Thinning | Thinned |
| Material Grade - Machining | C2 |
| Shank Type - Machining | Straight |
| Web Construction | Split |
| Primary Material Application ISO Code | P, K, M, N, S, H |
| Maximum Drilling Depth | 2 in |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Measurement System | Letter |
| Drill Bit Point Type | 4 Facet Point |
| Drill Length Class | Screw-Machine Length |
| Primary Material Application | Cast Iron, Steel |
| Spiral Direction | Right Hand |
| Secondary Material Application | Brass, Bronze, Copper, Aluminum, Hardened Steel |
| Helix Angle - Minimum | Not Applicable |
| Helix Angle - Maximum | 15 deg |
| Secondary Material Application ISO Code | N, H |
| Wire Rope Length | 3-3/8 in |
| Length | 3-3/8 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |