Sheet Metal Screw, Head Type Oval, Finish Plain, Material Stainless Steel, Screw Size #12, Fastener Length 3/4 in, Head Width 0.412 in, Head Height 0.203 in, Drive Size #3, Dimensional Standards ASME B18.6.4, SAE J933, For Maximum Material Thickness 1/4 in, Pack Size Small, Minimum Head Height Not Applicable, Minimum Head Width Not Applicable, Maximum Head Height 13/64 in, Maximum Head Width 13/32 in, System of Measurement Inch, Drive Phillips, Point Type A
| System of Measurement | Inch |
|---|---|
| Screw Size | #12 |
| Fastener Length | 3/4 in |
| Head Type | Oval |
| Drive | Phillips |
| Drive Size | #3 |
| Tip Type | Pointed |
| Material | Stainless Steel |
| Finish | Plain |
| Materials for Use With | Metal |
| Thread Style | Fully Threaded |
| Item | Sheet Metal Screw |
| Standards | ANSI/ASME B18.6.4, SAE J933, IFI |
| Meets/Exceeds | IFI, ANSI, ASME B18.6.4 and SAE J933 |
| Package Quantity | 100 |
| Head Angle (Deg.) | 82 |
| Head Dia. | 0.412 in |
| Head Height | 0.203 in |
| Dimensional Standards | ASME B18.6.4, SAE J933 |
| Point Type | A |
| Minimum Head Height | Not Applicable |
| Thread Size | #12 |
| Material Quality Standards | SAE J933 |
| Type | Sheet Metal Screw |
| Pack Size | Small |
| For Maximum Material Thickness | 1/4 in |
| Maximum Head Height | 13/64 in |
| Maximum Head Angle | 82 Degrees |
| Head Width | 0.412 in |
| Minimum Head Width | Not Applicable |
| Collation Quantity | Not Applicable |
| Minimum Thread Length | Not Applicable |
| Collation Angle | Not Applicable |
| For Use in Systems | General Purpose Threaded Fasteners for Insertion of Pre-Tapped Holes or for Use With Nuts, High Pressure, Vacuum |
| Thread Type | Coarse |
| Material Grade/Class | 18-8 |
| Collation Configuration | Not Applicable |
| Maximum Head Width | 13/32 in |
| Collation Type | Not Applicable |
| Shell Material | Stainless Steel |
| Country of Origin (subject to change) | Taiwan, Province of China |