Sheet Metal Screw, Head Type Oval, Finish Zinc-Plated, Material Steel, Screw Size #8, Fastener Length 3/4 in, Head Width 0.312 in, Head Height 0.152 in, Drive Size #2, Dimensional Standards ASME B18.6.4, Pack Size Small, Minimum Head Height Not Applicable, Minimum Head Width Not Applicable, Maximum Head Height 5/32 in, Maximum Head Width 5/16 in, System of Measurement Inch, Drive Phillips, Point Type AB, For Use in Systems Resin-Filled Plywood, Package Quantity 100
| System of Measurement | Inch |
|---|---|
| Screw Size | #8 |
| Fastener Length | 3/4 in |
| Head Type | Oval |
| Drive | Phillips |
| Drive Size | #2 |
| Tip Type | Pointed |
| Material | Steel |
| Finish | Zinc Plated |
| Materials for Use With | Metal |
| Thread Style | Fully Threaded |
| Item | Sheet Metal Screw |
| Standards | ANSI/ASME B18.6.4 |
| Application | Primarily used in Thin Metal or Resin-Filled Plywood |
| Head Angle (Deg.) | 82 |
| Meets/Exceeds | ANSI/ASME B18.6.4 |
| Head Dia. | 0.312 in |
| Package Quantity | 100 |
| Head Height | 0.152 in |
| Thread Size | #8 |
| Maximum Head Angle | 82 Degrees |
| Dimensional Standards | ASME B18.6.4 |
| Head Width | 0.312 in |
| Type | Sheet Metal Screw |
| Pack Size | Small |
| For Use in Systems | Resin-Filled Plywood |
| Length | 3/4 in |
| Drive Type | Phillips |
| Driver Size | #2 |
| Size | #8 |
| Minimum Head Width | Not Applicable |
| Maximum Head Width | 5/16 in |
| Minimum Head Height | Not Applicable |
| Maximum Head Height | 5/32 in |
| Point Type | AB |
| Thread Type | Fine |
| Material Quality Standards | ASME B18.6.3 |
| Shell Material | Steel |
| Country of Origin (subject to change) | Taiwan, Province of China |