Tornillo para lámina, tipo de cabeza de pan, acabado liso, material acero inoxidable, tamaño de tornillo n.º 8, longitud del sujetador 2 in, ancho de cabeza 0.322 in, altura de cabeza 0.109 in, tamaño de accionamiento n.º 2, normas dimensionales ASME B18.6.4, SAE J933, para espesor máximo de material 1/4 in, tamaño de paquete pequeño, altura mínima de cabeza no aplica, ancho mínimo de cabeza no aplica, altura máxima de cabeza 7/64 in, ancho máximo de cabeza 21/64 in, sistema de medición en pulgadas, accionamiento Phillips, tipo de punta A
| System of Measurement | Inch |
|---|---|
| Screw Size | #8 |
| Fastener Length | 2 in |
| Head Type | Pan |
| Drive | Phillips |
| Drive Size | #2 |
| Tip Type | Pointed |
| Material | Stainless Steel |
| Finish | Plain |
| Materials for Use With | Metal |
| Thread Style | Fully Threaded |
| Item | Sheet Metal Screw |
| Standards | ANSI/ASME B18.6.4, SAE J933, IFI |
| Meets/Exceeds | IFI, ANSI, ASME B18.6.4 and SAE J933 |
| Package Quantity | 100 |
| Head Dia. | 0.322 in |
| Head Height | 0.109 in |
| Head Width | 0.322 in |
| Pack Size | Small |
| Type | Sheet Metal Screw |
| Maximum Head Height | 7/64 in |
| Point Type | A |
| Material Quality Standards | SAE J933 |
| Minimum Head Height | Not Applicable |
| Thread Size | #8 |
| For Maximum Material Thickness | 1/4 in |
| Dimensional Standards | ASME B18.6.4, SAE J933 |
| Minimum Thread Length | Not Applicable |
| Maximum Head Width | 21/64 in |
| Maximum Head Angle | Not Applicable |
| Collation Configuration | Not Applicable |
| Collation Quantity | Not Applicable |
| Minimum Head Width | Not Applicable |
| Thread Type | Coarse |
| For Use in Systems | General Purpose Threaded Fasteners for Insertion of Pre-Tapped Holes or for Use With Nuts, High Pressure, Vacuum |
| Material Grade/Class | 18-8 |
| Collation Angle | Not Applicable |
| Collation Type | Not Applicable |
| Shell Material | Stainless Steel |
| Country of Origin (subject to change) | Taiwan, Province of China |