Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Length 6 in, Thread Size 3/8 In., Drive Type External Hex, Head Type Hex, Nut Width 0.5511 in, Washer Outside Diameter 0.80511 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Drill Bit Size Not Applicable, Compatible Material Block, Concrete, Masonry, Minimum Installation Torque Not Applicable, Maximum Installation Torque Not Applicable, Minimum Installation Depth 1 7/8 in
| Item | Sleeve Anchor |
|---|---|
| Compatible Material | Concrete, Masonry, Block |
| Anchor Diameter | 1/2 in |
| Overall Length | 6 in |
| Material Type | Carbon Steel |
| Finish | Zinc Plated |
| Head Type | Hex |
| Drive Type | External Hex |
| ICC Approved for Cracked Concrete | No |
| Drill Bit Size | Not Applicable |
| Thread Size | 3/8" |
| Maximum Material Thickness | Not Applicable |
| Minimum Installation Depth | 1-7/8 in |
| Ultimate Shear Strength (4,000 psi Concrete) | Not Applicable |
| Ultimate Tension Strength (4,000 psi Concrete) | 4,400 lb |
| ICC Approved for Un-Cracked Concrete | No |
| Material Grade | Not Graded |
| Package Quantity | 10 |
| Material | Steel |
| Min. Embedment | 1-7/8 in |
| Anchor Length | 6 in |
| Washer Outside Diameter | 0.8051 in |
| Maximum Installation Torque | Not Applicable |
| Minimum Hole Depth | Not Applicable |
| System of Measurement | Inch |
| Maximum Ultimate Shear Strength | Not Applicable |
| Nut Width | 0.5511 in |
| Minimum Material Thickness | Not Applicable |
| Material Grade/Class | Not Graded |
| Minimum Installation Torque | Not Applicable |
| Maximum Ultimate Tension Strength | Not Applicable |
| Pack Size | Small Pack |
| Wire Rope Length | 6 in |
| Length | 6 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | Multiple |