Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Overall Length 3 1/8 in, Thread Size #10, Drive Type Phillips, Head Type Flat, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Block, Concrete, Masonry, Minimum Installation Depth 1 1/8 in, Ultimate Tension Strength (4,000 psi Concrete) 1,694 lb, ICC Approved for Cracked Concrete No, ICC Approved for Un-Cracked Concrete No, Package Quantity 50
| Item | Sleeve Anchor |
|---|---|
| Compatible Material | Concrete, Masonry, Block |
| Anchor Diameter | 1/4 in |
| Overall Length | 3-1/8 in |
| Material Type | Carbon Steel |
| Finish | Zinc Plated |
| Head Type | Flat |
| Drive Type | Phillips |
| ICC Approved for Cracked Concrete | No |
| Thread Size | #10 |
| Minimum Installation Depth | 1-1/8 in |
| Ultimate Tension Strength (4,000 psi Concrete) | 1,694 lb |
| ICC Approved for Un-Cracked Concrete | No |
| Material Grade | Not Graded |
| Package Quantity | 50 |
| Min. Embedment | 1-1/8 in |
| Material | Steel |
| Anchor Length | 3-1/8 in |
| Material Grade/Class | Not Graded |
| System of Measurement | Inch |
| Pack Size | Small Pack |
| Wire Rope Length | 3-1/8 in |
| Length | 3-1/8 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | Multiple |