Split Lock Washer, Standard, Silicon Bronze, Fits Bolt Sizes 1/4 In., Inside Dia. 0.252 In., Outside Dia. 0.487 In., Thickness 0.062 In., Rockwell Hardness B90, Meets/Exceeds ASME B18.21.1, Package Quantity 100
| Item | Split Lock Washer |
|---|---|
| Material | Silicon Bronze |
| Finish | Plain |
| For Screw Size | 1/4 in |
| Outside Diameter | 0.487 in |
| Minimum Thickness | 1/16 in |
| Maximum Thickness | 1/16 in |
| Standards | ASME B18.21.1 |
| System of Measurement | Inch |
| Inside Diameter | 0.252 in |
| Material Grade/Class | Not Applicable |
| Package Quantity | 100 |
| Rockwell Hardness | B90 |
| Lock Washer Type | Split Lock |
| Pack Size | Small Pack |
| Dimensional Standards | ASME B18.21.1 |
| Hardness | 90 HRB |
| Inside Diameter - Maximum | 17/64 in |
| Outside Diameter - Maximum | 31/64 in |
| Type | Standard |
| Section Width - Minimum | 7/64 in |
| Minimum Inside Diameter | 1/4 in |
| Outside Diameter - Minimum | Not Applicable |
| Bearing Width - Minimum | 5/64 in |
| Shell Material | Silicon Bronze |
| Country of Origin (subject to change) | Multiple |