Square End Mill, 0.15625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Length of Cut 0.3125 in, Overall Length 2 in, Shank Dia. 3/16 in, Neck Dia. Not Applicable
| Measurement System | Inch |
|---|---|
| Milling Diameter | 5/32 in |
| Overall Length | 2 in |
| Number of Flutes | 4 |
| End Mill Style | Square |
| Finish | TiAlN |
| Length of Cut | 5/16 in |
| End Mill Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Cutting Direction | Right Hand |
| Shank Dia. | 3/16 in |
| Helix Angle | 30 deg |
| Milling Dia. | 5/32 in |
| Pitch | Not Applicable |
| Grade | C2 Micro Grain |
| End Mill Application | Finishing, Roughing |
| End Mill Material | Carbide |
| Item | Square End Mill |
| List Number | 203D |
| Single End/Double End | Double |
| Shank Type | Straight |
| Material - Machining | Carbide |
| Drilling Tool Configuration | Individual |
| Cutting Direction - Machining | Right Hand |
| Shank Type - Machining | Weldon Flat |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Finish - Machining | AlTiN |
| Material Grade - Machining | C2 Micrograin |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Hardened Steel, Steel, Tool and Die Steel |
| Primary Material Application ISO Code | P, H, K, N |
| Chip-Breaker | No |
| Series | Not Applicable |
| Flute Type | Spiral |
| Flute Spacing | Fixed |
| Max. Helix Angle | 30 deg |
| Coolant Fed | Non-Coolant Through |
| Secondary Material Application ISO Code | N, K, P, H |
| Min. Helix Angle | Not Applicable |
| Secondary Material Application | Cast Iron, Hardened Steel, Steel |
| Wire Rope Length | 2 in |
| Length | 2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |