Square End Mill, 0.25 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Straight, Length of Cut 0.75 in, Overall Length 2 1/2 in, Shank Dia. 1/4 in, Neck Dia. Not Applicable
| Dimension Type | Fractional Inch |
|---|---|
| Milling Diameter | 1/4 in |
| End Mill Material | Carbide |
| Number of Flutes | 2 |
| Length of Cut | 3/4 in |
| Single End/Double End | Single |
| End Mill Cutting Type | Center Cutting |
| Grade | General Purpose |
| Shank Dia. | 1/4 in |
| Overall Length | 2-1/2 in |
| Shank Type | Straight |
| Milling Dia. | 1/4 in |
| Cutting Direction | Right Hand |
| Helix Angle | 30 deg |
| Stainless (M) Compatibility | No |
| Non Ferrous (N) Compatibility | No |
| End Mill Application | Finishing, Roughing |
| Steel (P) Compatibility | No |
| Finish | TiCN |
| Pitch | Not Applicable |
| List Number | 202 |
| Hardened (H) Compatibility | No |
| End Mill Style | Square |
| Super Alloy (S) Compatibility | No |
| Item | Square End Mill |
| Cast Iron (K) Compatibility | No |
| Neck Length | Not Applicable |
| Neck Dia. | Not Applicable |
| Cutting Direction - Machining | Right Hand |
| Measurement System | Inch |
| Drilling Tool Configuration | Individual |
| Material - Machining | Carbide |
| Shank Type - Machining | Straight |
| Finish - Machining | TiCN |
| Material Grade - Machining | General Purpose |
| Primary Material Application ISO Code | P, K, H, N |
| Primary Material Application | Aluminum, Cast Iron, Hardened Steel, Steel, Tool and Die Steel |
| Chip-Breaker | No |
| Series | Not Applicable |
| Coolant Fed | Non-Coolant Through |
| Flute Type | Spiral |
| Secondary Material Application ISO Code | N, K, P, H |
| Max. Helix Angle | 30 deg |
| Secondary Material Application | Cast Iron, Hardened Steel, Steel |
| Flute Spacing | Fixed |
| Min. Helix Angle | Not Applicable |
| Wire Rope Length | 2-1/2 in |
| Length | 2-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |