Broca de ranura recta, Tamaño de broca 7/16 in, Ángulo de punta de broca 140 grados, Material - Maquinado Carburo, Acabado - Maquinado Bright (sin recubrimiento), Equivalente decimal 0.4375, Pulgada fraccionaria, Tipo de punta de broca punta muescada, Longitud de ranura 2 1/16 in
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 3-7/16 in |
| Drill Bit Size | 7/16 in |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 2-1/16 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.4375 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | Bright |
| Application | Metalworking |
| Drill Bit Dimension Type | Fractional Inch |
| Material | Carbide |
| Number of Pieces | 1 |
| Drill Bit Grouping | Drill Bit |
| Finish | Bright |
| Depth:Dia. Ratio | 5 xD |
| Shank Dia. | 7/16 in |
| List Number | 470 |
| Point Type | Notched |
| Type | Straight Flute |
| Grade | General Purpose |
| Drill Point (Deg.) | 140 |
| Fractional Size (In.) | 7/16 |
| Depth x Dia. Ratio | 5 xD |
| Shank Type - Machining | Straight |
| Maximum Drilling Depth | 2-1/16 in |
| Primary Material Application | All Materials |
| Helix Angle | 0 Degrees |
| Finish - Machining | Bright |
| Material Grade - Machining | C2 |
| Material - Machining | Carbide |
| Aircraft Drill | No |
| Web Thinning | Thinned |
| Measurement System | Fractional Inch |
| Coolant Fed | Non-Coolant Through |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Primary Material Application ISO Code | K, P, H, M, S |
| Drill Bit Point Type | Notched Point |
| Flute Type | Straight |
| Cutting Direction | Right Hand |
| Shank Length | 1 763/2000 in |
| Web Construction | Tapered |
| Drill Length Class | Jobber-Length |
| Standards | Not Rated |
| Spiral Direction | Right Hand |
| Wire Rope Length | 3-7/16 in |
| Length | 3-7/16 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |