Taper Pin,#5,0.289 in dia,Steel,PK50, Thread Size Not Applicable, Pin Size #5, Large End Diameter 0.289 in, Small End Diameter 0.258 in, Pin Type Standard, Product Type Taper Pin, Material Steel, Material Grade/Class Ungraded, Finish Plain, Usable Length 1 1/2 in, Large End Diameter Tolerance +0.0013/-0.0007 in, Small End Diameter Tolerance +0.0013/-0.0007 in, Shank Length 1 1/2 in, System of Measurement Inch, Usable Length Tolerance +/-0.010 in, Dimensional Standards ASME B18.8.2
| Item | Taper Pin,#5,0.289 in dia,Steel,PK50 |
|---|---|
| System of Measurement | Inch |
| Taper Pin Type | Standard |
| Basic Material | Steel |
| Fastener Finish | Plain |
| Large End Dia. | 0.289 in |
| Small End Dia. | 0.258 in |
| Fastener Length | 1-1/2 in |
| Standards | ANSI/ASME B18.8.2 |
| Single Shear Strength (Lbs.) | 60,000 |
| Length Tolerance | +/-0.010 in |
| Material | Steel |
| Size | #5 |
| Type | Standard |
| Meets | ANSI/ASME B18.8.2 |
| Package Quantity | 50 |
| Finish | Plain |
| Rockwell Hardness | B85 |
| Single Shear Strength (PSI) | 78,000 |
| Pin Item | Taper Pin |
| Overall Length | 1-1/2 in |
| Large End Dia. Tolerance | -0.0007 to +0.0013 in |
| Thread Size | Not Applicable |
| Usable Length | 1-1/2 in |
| Usable Length Tolerance | +/-0.01 in |
| Pin Type | Standard |
| Small End Diameter Tolerance | +0.0013/-0.0007 in |
| Pin Size | #5 |
| Shank Length Tolerance | +/-0.01 in |
| Small End Diameter | 0.258 in |
| Product Type | Taper Pin |
| Dimensional Standards | ASME B18.8.2 |
| Large End Diameter | 0.289 in |
| Manufacturer Location | Made in USA* |
| Shank Length | 1-1/2 in |
| Pack Size | Small Pack |
| Material Grade/Class | Ungraded |
| Large End Diameter Tolerance | +0.0013/-0.0007 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | United States |