Pasador cónico, #10, 0.707 in de diámetro, Acero, Tamaño de rosca no aplicable, Tamaño de pasador #10, Diámetro del extremo grande 0.707 in, Diámetro del extremo pequeño 0.644 in, Tipo de pasador Estándar, Tipo de producto Pasador cónico, Material Acero, Grado/Clase del material Sin clasificar, Acabado Liso, Longitud útil No aplicable, Tolerancia del diámetro del extremo pequeño +0.01/-0.02 in, Longitud del vástago 3 in, Sistema de medición Pulgada, Tolerancia de longitud útil No aplicable, Tipo de rosca No aplicable, Normas de calidad del material No aplicable
| Item | Taper Pin,#10,0.707 in dia,Steel |
|---|---|
| System of Measurement | Inch |
| Taper Pin Type | Standard |
| Basic Material | Steel |
| Material Grade | Free Cutting Steel |
| Fastener Finish | Plain |
| Large End Dia. | 0.705 to 0.707 in |
| Small End Dia. | #10 |
| Fastener Length | 3 in |
| Standards | ASME B18.8.2 |
| Meets | ASME B18.8.2 |
| Overall Length | 3 in |
| Package Quantity | 1 |
| Finish | Plain |
| Material | Steel |
| Pin Item | Taper Pin |
| Type | Standard |
| Size | #10 x 3 |
| Usable Length | Not Applicable |
| Rockwell Hardness | Not Applicable |
| Thread Size | Not Applicable |
| Includes | Not Applicable |
| Usable Length Tolerance | Not Applicable |
| Dimensional Standards | ASME B18.8.2 |
| Material Grade/Class | Ungraded |
| Product Type | Taper Pin |
| Manufacturer Location | Globally Sourced |
| Shank Length Tolerance | +0.01/-0.02 in |
| Small End Diameter Tolerance | +0.01/-0.02 in |
| Pack Size | Small Pack |
| Single Shear Strength | Not Applicable |
| Large End Diameter | 0.707 in |
| Material Quality Standards | Not Applicable |
| Shank Length | 3 in |
| Pin Size | #10 |
| Pin Type | Standard |
| Small End Diameter | 0.644 in |
| Thread Type | Not Applicable |
| Shell Material | Steel |
| Country of Origin (subject to change) | Multiple |