Varilla de acero para herramientas, Material Acero para herramientas, Grado de material A2, Longitud total 18 in, Tratable térmicamente Tratable térmicamente, Tratamiento térmico Endurecido al aire, Acabado mecánico Fresado, Diámetro exterior 1 in, Tolerancia de diámetro exterior +0.01 in/+0.039 in, Resistencia a la fluencia 55,000 psi, Fabricación Laminado en caliente, Dureza Rockwell 60 HRC, Dureza Brinell 201 BHN, Resistencia a la tracción No especificada, Maquinabilidad 42 por ciento, Tolerancia de longitud +/-1.5 in, Incluye Certificado de material Certificado de material con número de lote
| Item | Tool Steel Rod |
|---|---|
| Material | Tool Steel |
| Standards | ASTM A681, DIN 1.2363, SAE J437, SAE J438 |
| Length Tolerance | +/-1.5 in |
| Shape | Rod |
| Includes Material Certificate | Material Certificate with Lot Number |
| Heat Treatment | Air-Hardened |
| Mechanical Finish | Mill |
| Material Grade | A2 |
| Fabrication | Hot Rolled |
| Yield Strength | 55,000 psi |
| Overall Length | 18 in |
| Fractional Size | 1 in |
| Tolerance Rating | Oversized |
| Outside Diameter | 1 in |
| Application | Blanking, Block and Ring Gauges, Brick Mold Liners, Coining Dies, Cold Forming Tools, Forming, Forming Rolls, Knurling Tools, Knurls, Mandrels, Master Hobs, Molds, Punch Plates, Punches, Reamers, Shear Blades, Slitter Blades, Spindles, Stamping Dies, Thread Roller Dies, Trim Dies |
| Decimal Equivalent | 1 in |
| Heat Treatable | Heat Treatable |
| System of Measurement | Inch |
| Brinell Hardness | 201 BHN |
| Machinability | 42 % |
| Outside Diameter Tolerance | +0.01 in/+0.039 in |
| Rockwell Hardness | 60 HRC |
| Tensile Strength | Not Rated |
| Resistance Properties | Wear-Resistant |
| Galvanized | Not Galvanized |
| Wire Rope Length | 18 in |
| Length | 18 in |
| Shell Material | Tool Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |