HDPE Sheet, HDPE, Grade Standard, Plastic Length 32 in, Plastic Width 16 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 3,500 psi, Impact Strength 3 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.035 lb/cu in, Plastic Hardness 60D
| Item | HDPE Sheet |
|---|---|
| Plastic Material | HDPE |
| Plastic Thickness | 1/4 in |
| Plastic Width | 16 in |
| Plastic Length | 32 in |
| Plastic Color | White |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -70 Degrees F |
| Color | White |
| Tensile Strength | 3,500 psi |
| Impact Strength | 3 ft-lb/in |
| Length Tolerance | (-1" - +1") |
| Width Tolerance | (-0.25" - +0.25") |
| Operating Temp. Range | -70 to 180 deg F |
| Standards | FDA, UL 94 HB |
| Thickness Tolerance | -0.014" - +0" |
| Thickness | 1/4 in |
| Length | 32" |
| Material | HDPE |
| Width | 16" |
| Plastic Density | 0.035 lb/cu in |
| Plastic Thickness Tolerance | +0.006/-0.02 in |
| Grade | Standard |
| Impact Strength Rating | Good |
| Shape | Rectangle |
| Minimum Adhesive Temperature | Not Applicable |
| Plastic Hardness | 60D |
| Water Absorption | 0.01% |
| Friction Coefficient | 0.2 |
| Friction Rating | Very Slippery |
| Plastic Clarity | Opaque |
| Water Absorption Rating | Excellent |
| Maximum Adhesive Temperature | Not Applicable |
| Backing Type | No Backing |
| Tensile Strength Rating | Poor |
| Minimum Temperature | -70 deg F |
| Corrosion and Chemical Resistance | Good |
| Nominal Size | 16 in W x 32 in L |
| UV Resistant | No |
| Plastic Length Tolerance | +/-1 in |
| Plastic Width Tolerance | +/-1 in |
| Wear Factor | Good |
| Maximum Temperature | 180 deg F |
| Plastic Hardness Rating | Medium |
| Machinability | 100 % |
| Temperature Range | -70 to 180 deg F |
| Metal Detectable | No |
| UL 752 Ballistic Rating | Not Applicable |
| Wear Rate | Not Rated |
| Rockwell Hardness | 75 HRR |
| Dielectric Strength | 2.4 kV/mm |
| Elongation | 5 % |
| Light Transmission | Not Applicable |
| Shore Hardness | 60 Shore D |
| Scratch-Resistant | Not Scratch-Resistant |
| Weight | 4.48 lb |
| Filler Material | Not Applicable |
| Coefficient of Thermal Expansion | 12 x 10^-5 K^-1 |
| Number of Walls | Not Applicable |
| Flexural Modulus | 1,370 MPa |
| Product Form | Sheet |
| Product Type | Plastic Sheet |
| Fabrication | Not Applicable |
| UV-Resistant | Not UV-Resistant |
| Static-Resistant | Not Static-Resistant |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |