Polypropylene Rod, Polypropylene, Grade Standard, Plastic Length 4 ft, Plastic Diameter 1/2 in, White, Plastic Clarity Opaque, Minimum Temperature -22 Degrees F, Maximum Temperature 190 Degrees F, Tensile Strength 3,400 psi, Impact Strength 0.8 ft-lb/in, Plastic Hardness Rockwell R79
| Item | Rod Stock |
|---|---|
| Material | Polypropylene |
| Color | White |
| Length | 4 ft. |
| Diameter | 1/2 in |
| Tensile Strength (PSI) | 3,400 |
| Diameter Tolerance | -0/+.125 |
| Min. Temp. (F) | 32 Degrees F |
| Type | Thermoplastic |
| Length Tolerance | +/-0.250 in |
| Impact Strength (Lbs.) | 0.8 |
| Max. Temp. (F) | 212 |
| Standards | FDA |
| Impact Strength | 0.8 ft-lb/in |
| UV Resistant | No |
| Grade | Standard |
| Corrosion and Chemical Resistance | Good |
| Temperature Range | -22 to 190 deg F |
| Friction Rating | Slippery |
| Maximum Temperature | 190 deg F |
| Plastic Hardness | Rockwell R79 |
| Nominal Size | 1/2 in dia x 4 ft L |
| Tensile Strength | 3,400 psi |
| Plastic Length Tolerance | +/-0.250 in |
| Plastic Diameter | 1/2 in |
| Shape | Rod |
| Minimum Temperature | -22 deg F |
| Plastic Diameter Tolerance | +0.125/-0.000 in |
| Machinability | Not Applicable |
| Plastic Clarity | Opaque |
| Impact Strength Rating | Poor |
| Wear Factor | Fair |
| Plastic Hardness Rating | Hard |
| Water Absorption Rating | Excellent |
| Tensile Strength Rating | Poor |
| Plastic Length | 4 ft |
| Metal Detectable | No |
| Coefficient of Thermal Expansion | Not Applicable |
| Weight | 0.33 lb |
| Scratch-Resistant | Not Applicable |
| Wear Rate | Not Applicable |
| FDA Compliance | Not Applicable |
| Filler Material | Not Applicable |
| Fabrication | Extruded |
| Rockwell Hardness | 79 HRR |
| Dielectric Strength | Not Applicable |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | Not Applicable |
| Light Transmission | Not Applicable |
| Flexural Modulus | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |