Rollo de PTFE, PTFE, Grado estándar, Longitud del plástico 25 ft, Ancho del plástico 12 in, Espesor del plástico 2 mil, Blanco, Claridad del plástico Translúcido, Resistencia a la tracción 1,500 psi, Resistencia al impacto 3 ft-lb/in, Coeficiente de fricción 0.08, Absorción de agua 0.01 por ciento, Rango de temperatura -350 grados a 550 grados F, Densidad del plástico 138.24 lb/pie cúbico, Dureza del plástico 55D
| Item | Film Stock |
|---|---|
| Plastic Material | PTFE |
| Plastic Thickness | 0.002 in |
| Plastic Width | 12 in |
| Plastic Length | 25 ft |
| Plastic Color | White |
| Max. Temp. (F) | 500 |
| Min. Temp. (F) | -400 Degrees F |
| Color | White |
| Material Type | Standard Grade |
| Width Tolerance | +/-0.250 in |
| Length Tolerance | +/-0.500 in |
| Plastic Properties | Abrasion Resistant, Chemical/Corrosion Resistant, Electrical Applications, FDA Approved, Flame Retardant, Impact Resistant, Moisture Resistant, Non-Friction Surface, Oil Resistant, UV Tolerant, Wear Material |
| Thickness Tolerance | +/-0.0002 in |
| Tensile Strength | 1,500 psi |
| Plastic Grouping | Film Stock |
| Operating Temp. Range | -400 to 500 deg F |
| Standards | AMS 3652, ASTM D3308 |
| Material Color Family | White |
| Impact Strength | 3 ft-lb/in |
| Length | 25 ft. |
| Material | PTFE |
| Thickness | 0.002 in |
| Width | 12" |
| Plastic Length Tolerance | +/-1/2 in |
| Plastic Thickness Tolerance | +/-0.0002 in |
| Weight | 0.055 lb |
| Temperature Range | -350 to 550 deg F |
| Plastic Hardness Rating | Medium Soft |
| Plastic Hardness | 55D |
| Corrosion and Chemical Resistance | Excellent |
| Plastic Width Tolerance | +/-1/4 in |
| Nominal Size | 12 in W x 25 ft L |
| Minimum Temperature | -350 deg F |
| Backing Type | No Backing |
| Wear Factor | Excellent |
| Maximum Temperature | 550 deg F |
| Shape | Rectangle |
| Water Absorption | 0.01% |
| Plastic Clarity | Translucent |
| Machinability | Not Rated |
| Tensile Strength Rating | Poor |
| Friction Rating | Very Slippery |
| Grade | Standard |
| Friction Coefficient | 0.08 |
| Plastic Density | 138.24 lb/cu ft |
| Impact Strength Rating | Good |
| UV Resistant | Yes |
| Elongation | 200 % |
| Water Absorption Rating | Excellent |
| Maximum Adhesive Temperature | Not Applicable |
| Metal Detectable | No |
| UV-Resistant | UV-Resistant |
| Wear Rate | 3.40 x 10^-4 cu mm/N-m |
| Fabrication | Molded |
| Rockwell Hardness | 50 HRR |
| Static-Resistant | Not Static-Resistant |
| Light Transmission | 9 % |
| Product Type | Plastic Film |
| Product Form | Roll |
| Flexural Modulus | 0.04 GPa |
| Filler Material | Not Applicable |
| FDA Compliance | Not FDA Compliant |
| Number of Walls | Not Applicable |
| UL 752 Ballistic Rating | Not Applicable |
| Shore Hardness | 55 Shore D |
| Dielectric Strength | 80 kV/mm |
| Coefficient of Thermal Expansion | 13 x 10^-5 |
| Scratch-Resistant | Not Scratch-Resistant |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |