Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 6 in, Plastic Width 6 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 70D
| Item | Sheet Stock |
|---|---|
| Plastic Material | UHMW Polyethylene |
| Plastic Thickness | 3/8 in |
| Plastic Width | 6 in |
| Plastic Length | 6 in |
| Plastic Color | White |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -70 Degrees F |
| Color | White |
| Thickness | 3/8 in |
| Metal Detectable | No |
| Material | UHMW Polyethylene |
| Elongation | 200 % |
| Tensile Strength | 4,400 psi |
| Backing Type | No Backing |
| Impact Strength | 16 ft-lb/in |
| Length | 6" |
| Width | 6" |
| Operating Temp. Range | -70 to 180 deg F |
| Plastic Properties | Non-Friction Surface |
| Standards | FDA, UL 94 HB |
| Shape | Square |
| Plastic Hardness | 70D |
| Machinability | 100 % |
| Water Absorption | 0.01% |
| Nominal Size | 6 in W x 6 in L |
| Plastic Length Tolerance | +/-1 in |
| Plastic Width Tolerance | +/-1 in |
| Tensile Strength Rating | Poor |
| Impact Strength Rating | Excellent |
| Plastic Thickness Tolerance | +0.012/-0.009 in |
| Plastic Clarity | Opaque |
| Maximum Temperature | 180 deg F |
| Plastic Hardness Rating | Medium |
| Friction Rating | Very Slippery |
| Water Absorption Rating | Excellent |
| UV Resistant | No |
| Temperature Range | -70 to 180 deg F |
| Friction Coefficient | 0.15 |
| Corrosion and Chemical Resistance | Good |
| Minimum Temperature | -70 deg F |
| Wear Factor | Excellent |
| Plastic Density | 0.034 lb/cu in |
| Grade | Standard |
| Maximum Adhesive Temperature | Not Applicable |
| Minimum Adhesive Temperature | Not Applicable |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Dielectric Strength | 45 kV/mm |
| UV-Resistant | Not UV-Resistant |
| Fabrication | Not Applicable |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | 70 Shore D |
| Filler Material | Not Applicable |
| Light Transmission | Not Applicable |
| Number of Walls | Not Applicable |
| Product Type | Plastic Sheet |
| Scratch-Resistant | Not Scratch-Resistant |
| Weight | 0.5 lb |
| Wear Rate | Not Rated |
| Flexural Modulus | 400 MPa |
| Rockwell Hardness | 50 HRM |
| Product Form | Sheet |
| UL 752 Ballistic Rating | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |