Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 2.25 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D
| Item | Sheet Stock |
|---|---|
| Plastic Material | UHMW |
| Plastic Thickness | 2-1/4 in |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Plastic Color | White |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -22 Degrees F |
| Color | White |
| Tensile Strength | 5,800 psi |
| Material Color Family | White |
| Length Tolerance | +/-0.250 in |
| Plastic Grouping | Sheet Stock |
| Thickness Tolerance | +/-10% |
| Standards | 3-A Dairy, FDA, USDA |
| Material Type | Virgin Food Contact Grade |
| Plastic Properties | Chemical/Corrosion Resistant, FDA Approved, Non-Friction Surface, Moisture Resistant, Oil Resistant, Wear Material |
| Operating Temp. Range | -22 to 180 deg F |
| Width Tolerance | +/-0.25 in |
| Length | 12" |
| Material | UHMW Polyethylene |
| Width | 12" |
| Elongation | 200 % |
| Thickness | 2-1/4 in |
| Backing Type | No Backing |
| Water Absorption Rating | Excellent |
| Impact Strength | No Break |
| Shape | Square |
| Plastic Length Tolerance | +/-1/4 in |
| Wear Factor | Excellent |
| Machinability | 100 % |
| Minimum Temperature | -22 deg F |
| UV Resistant | No |
| Maximum Temperature | 180 deg F |
| Plastic Width Tolerance | +/-1/4 in |
| Plastic Thickness Tolerance | +/-10% |
| Plastic Clarity | Opaque |
| Nominal Size | 12 in W x 12 in L |
| Impact Strength Rating | Excellent |
| Friction Rating | Very Slippery |
| Tensile Strength Rating | Good |
| Water Absorption | 0.01% |
| Plastic Hardness Rating | Medium |
| Friction Coefficient | 0.12 |
| Temperature Range | -22 to 180 deg F |
| Corrosion and Chemical Resistance | Good |
| Grade | Standard |
| Plastic Hardness | 66D |
| Plastic Density | 0.034 lb/cu in |
| Maximum Adhesive Temperature | Not Applicable |
| Minimum Adhesive Temperature | Not Applicable |
| Number of Walls | Not Applicable |
| UL 752 Ballistic Rating | Not Applicable |
| Scratch-Resistant | Not Scratch-Resistant |
| Shore Hardness | 70 Shore D |
| Product Form | Sheet |
| Product Type | Plastic Sheet |
| UV-Resistant | Not UV-Resistant |
| Static-Resistant | Not Static-Resistant |
| Light Transmission | Not Applicable |
| Metal Detectable | No |
| Dielectric Strength | 45 kV/mm |
| Weight | 12.52 lb |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Filler Material | Not Applicable |
| Flexural Modulus | 400 MPa |
| Rockwell Hardness | 50 HRM |
| Wear Rate | Not Rated |
| Fabrication | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |