Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.0625 in, White, Plastic Clarity Opaque, Tensile Strength 5,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 66D
| Item | Sheet Stock |
|---|---|
| Plastic Material | UHMW |
| Plastic Thickness | 0.063 in |
| Plastic Width | 24 in |
| Plastic Length | 24 in |
| Plastic Color | White |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -22 Degrees F |
| Color | White |
| Thickness Tolerance | +/-10% |
| Plastic Grouping | Sheet Stock |
| Plastic Properties | Chemical/Corrosion Resistant, FDA Approved, Non-Friction Surface, Moisture Resistant, Oil Resistant, Wear Material |
| Tensile Strength | 5,800 psi |
| Width Tolerance | +/-0.25 in |
| Standards | 3-A Dairy, FDA, USDA |
| Material Type | Virgin Food Contact Grade |
| Operating Temp. Range | -22 to 180 deg F |
| Length Tolerance | +/-0.250 in |
| Material Color Family | White |
| Width | 24" |
| Length | 24" |
| Material | UHMW Polyethylene |
| Thickness | 0.063 in |
| Backing Type | No Backing |
| Elongation | 200 % |
| Plastic Width Tolerance | +/-1/4 in |
| Plastic Clarity | Opaque |
| UV Resistant | No |
| Machinability | 100 % |
| Corrosion and Chemical Resistance | Good |
| Plastic Thickness Tolerance | +/-10% |
| Friction Rating | Very Slippery |
| Impact Strength Rating | Excellent |
| Impact Strength | No Break |
| Minimum Temperature | -22 deg F |
| Plastic Hardness Rating | Medium |
| Water Absorption Rating | Excellent |
| Nominal Size | 24 in W x 24 in L |
| Temperature Range | -22 to 180 deg F |
| Plastic Hardness | 66D |
| Shape | Square |
| Maximum Temperature | 180 deg F |
| Tensile Strength Rating | Good |
| Grade | Standard |
| Wear Factor | Excellent |
| Plastic Length Tolerance | +/-1/4 in |
| Friction Coefficient | 0.12 |
| Water Absorption | 0.01% |
| Minimum Adhesive Temperature | Not Applicable |
| Plastic Density | 0.034 lb/cu in |
| Maximum Adhesive Temperature | Not Applicable |
| Flexural Modulus | 400 MPa |
| Scratch-Resistant | Not Scratch-Resistant |
| UV-Resistant | Not UV-Resistant |
| Metal Detectable | No |
| Light Transmission | Not Applicable |
| Filler Material | Not Applicable |
| Shore Hardness | 70 Shore D |
| Dielectric Strength | 45 kV/mm |
| Weight | 2.73 lb |
| Number of Walls | Not Applicable |
| Product Type | Plastic Sheet |
| Static-Resistant | Not Static-Resistant |
| UL 752 Ballistic Rating | Not Applicable |
| Wear Rate | Not Rated |
| Product Form | Sheet |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Rockwell Hardness | 50 HRM |
| Fabrication | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |