Polyethylene Sheet, UHMW Polyethylene, Grade Enhanced Temperature, Plastic Length 4 ft, Plastic Width 12 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 6,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 275 Degrees F, Plastic Density 0.033 lb/cu in, Plastic Hardness 68D
| Item | Sheet Stock |
|---|---|
| Plastic Material | UHMW |
| Plastic Thickness | 1/2 in |
| Plastic Width | 12 in |
| Plastic Length | 48 in |
| Plastic Color | White |
| Max. Temp. (F) | 275 |
| Min. Temp. (F) | -22 Degrees F |
| Color | White |
| Tensile Strength | 6,800 psi |
| Thickness Tolerance | +/-10% |
| Plastic Grouping | Sheet Stock |
| Material Type | High Operating Temperature |
| Operating Temp. Range | -22 to 275 deg F |
| Length Tolerance | +/-0.250 in |
| Material Color Family | White |
| Width Tolerance | +/-0.25 in |
| Plastic Properties | Chemical/Corrosion Resistant, Non-Friction Surface, Moisture Resistant, Oil Resistant, Wear Material |
| Material | UHMW Polyethylene |
| Elongation | 285 % |
| Length | 48" |
| Standards | Not Rated |
| Backing Type | No Backing |
| Thickness | 1/2 in |
| Width | 12" |
| Plastic Hardness Rating | Medium |
| Plastic Width Tolerance | +/-1/4 in |
| Plastic Length Tolerance | +/-1/4 in |
| Plastic Thickness Tolerance | +/-10% |
| Friction Coefficient | 0.12 |
| Maximum Temperature | 275 deg F |
| Impact Strength | No Break |
| Water Absorption Rating | Excellent |
| Machinability | 100 % |
| Plastic Hardness | 68D |
| UV Resistant | No |
| Grade | Enhanced Temperature |
| Shape | Rectangle |
| Minimum Temperature | -22 deg F |
| Friction Rating | Very Slippery |
| Impact Strength Rating | Excellent |
| Corrosion and Chemical Resistance | Good |
| Nominal Size | 12 in W x 48 in L |
| Temperature Range | -22 to 275 deg F |
| Wear Factor | Excellent |
| Tensile Strength Rating | Good |
| Water Absorption | 0.01% |
| Plastic Clarity | Opaque |
| Maximum Adhesive Temperature | Not Applicable |
| Plastic Density | 0.033 lb/cu in |
| Minimum Adhesive Temperature | Not Applicable |
| Product Type | Plastic Sheet |
| Fabrication | Not Applicable |
| Shore Hardness | 68 Shore D |
| Weight | 11.3 lb |
| Rockwell Hardness | 65 HRM |
| UL 752 Ballistic Rating | Not Applicable |
| Filler Material | Not Applicable |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Number of Walls | Not Applicable |
| UV-Resistant | Not UV-Resistant |
| Dielectric Strength | 91 kV/mm |
| Wear Rate | Not Rated |
| Metal Detectable | No |
| Scratch-Resistant | Not Scratch-Resistant |
| Flexural Modulus | 430 MPa |
| FDA Compliance | Not FDA Compliant |
| Product Form | Sheet |
| Static-Resistant | Not Static-Resistant |
| Light Transmission | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |