Wood Screw, Finish Zinc-Plated, Material Steel, Drive Phillips, Screw Size #10, Fastener Length 5/8 in, Head Width 0.385 in, Head Height 0.137 in, Drive Size #3, Threads per Inch 13, Thread Style Partially Threaded, Minimum Thread Length 1 19/64 in, Pack Size Small, Maximum Head Width 25/64 in, Minimum Head Width Not Applicable, Maximum Head Height 9/64 in, Minimum Head Height Not Applicable, System of Measurement Inch, Head Type Flat, Point Type Not Applicable
| System of Measurement | Inch |
|---|---|
| Screw Size | #10 |
| Fastener Length | 5/8 in |
| Head Type | Flat |
| Drive | Phillips |
| Drive Size | #3 |
| Material | Steel |
| Finish | Zinc Plated |
| Thread Style | Partially Threaded |
| Standards | ASME B18.6.1 |
| Item | Wood Screw |
| Head Angle (Deg.) | 82 |
| Head Dia. | 0.34 in |
| Head Height | 0.137 in |
| Meets/Exceeds | ASME B18.6.1 |
| Package Quantity | 100 |
| Type | Wood Screw |
| Maximum Head Height | 9/64 in |
| Minimum Head Width | Not Applicable |
| Overall Length | 5/8 in |
| Minimum Head Height | Not Applicable |
| Thread Type | Coarse |
| Dimensional Standards | ASME B18.6.1 |
| Head Width | 0.385 in |
| Maximum Head Width | 25/64 in |
| Pack Size | Small |
| Point Type | Not Applicable |
| Threads per Inch | 13 |
| Maximum Head Angle | 82 Degrees |
| Minimum Thread Length | 1-19/64 in |
| Tip Type | Pointed |
| Material Quality Standards | SAE J429 |
| Maximum Drill Bit Size | Not Applicable |
| Minimum Drill Bit Size | Not Applicable |
| Wire Rope Length | 5/8 in |
| Length | 5/8 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | Multiple |